Exakta to EOS adapter

This post is a response to a comment asking me about my Exakta to Canon EOS adapter which I am using for my Trioplan 100mm lens. The reason I wanted to have this adapter is that I had got an Exakta Varex IIa with 2 wonderful lenses (Meyer-Optik Görlitz Trioplan 100mm f/2.8, and a Carl Zeiss Jena 50mm f/2.8) which I really wanted to try on a digital camera.

I have no information about the manufacturer of this adapter since there is no trademark on it and the packaging was also very minimalistic (small white paper box with a price-tag). I bought it new in Hungary for a little more than 20€ which is a little pricy in my opinion if you compare it to regular M42 to  EOS adapters. But it has to be said, that this adapter is very well made, and has a more complex shape than an M42 model, thus manufacturing must be more expensive.

Built and usability

The adapter is very thin and I had no problem to focus to infinity when using it. It does not features any electronic elements, but my Canon 450D is capable to work in aperture priority mode when I preset aperture on the lens. This works really fine for me with live view for focusing.

Exakta to EOS adapter (lens side)

Exakta to EOS adapter (lens side)

The Exakta mount features 2 bayonets: an inner bayonet for smaller lenses and another one which is outside of camera body for large lenses. This adapter can be used for the inner mount only, but it is not an issue at all for me as I usually don’t use large telephoto lenses.

Note the 2 red dots, they indicates the matching points for the lens being attached, although only one is valid for each lens. I suppose this is necessary to make possible to lock different type of lenses in the right position (aperture indicator at should be at the top). The adapter clicks when the lens is in position, so it is very straight forward to use. The only trouble could happen if you picked the wrong red dot, so the markings on your lens could be on an odd position.

Exakta to EOS adapter (body side)

Exakta to EOS adapter (body side)

The copper plates act as strings and they are used to lock the lens in position and also they can be used to release it. You have to remove the lens with the adapter from the body in order to change lens. The locking strings can be accessed only from the back of the adapter.

Troubles with shutter release button

Tessar with shutter/aperture button.

Tessar with shutter/aperture button.

The Meyer Trioplan 100mm f/2.8 mounts flawlessly with this adapter, but I was a bit disappointed when I realized that  I cannot mount my 50mm Tessar. The reason is the shutter release button (1) which is built together with the lens itself.  The little arm which holds the shutter release button collides with the adapter (2), therefore it is not possible to mount. I have read that it is possible to remove this part from the lens, but frankly I don’t want to do it.
In addition this button triggers the aperture mechanisms and sets the aperture in place when pressed. It means that it would be very tricky to shoot with this lens on a digital body  even if the adapter would work (apart from wide open settings).

Even though I am sure these lenses could be converted for digital use, I prefer to look for lenses without this shutter button construction.

Links

Related Post

7 comments

Leave a Reply

  1. JC · February 3, 2013

    Thank you for your comments about the exakta-eos adapter. I have in favourites your page of Trioplan 100 because of I think my own trioplan has fungus. I leaved a comment (JC) and had read the Mark accident. I am not confident on trying to clean my 100/2.8.
    Maybe it’s better try to buy a new trioplan on exakta mount and but this adapter. Do you know if Trioplan 100/2’8 exakta reaches infinity on the 5d?
    Thanks in advance
    JC.

    • camerajunky · February 3, 2013

      Hello JC,

      I am 99% sure that the Trioplan with Exakta mount can reach infinite on an 5D. I have no problems with infinite with my 450D and with this adapter.

      Gabor

  2. OldMan · February 3, 2013

    Trioplan with Exakta to Eos adapter might have mirror clearance problems.
    So, be careful and listen for the mirror hit.

    • camerajunky · February 3, 2013

      Thanks for the advise.
      Until now I had no problem with mirror clearance on a cropped frame Canon body with the Trioplan. But it does not mean that it works the same on every body with every adapter. Better to be careful.

  3. Jorge · February 3, 2013

    Excellent post Gabor and rest of the participants, any update on an adapter that works on a full frame (canon 6D) without the mirror hitting on it?

    thank you guys in advance

    Jorge

  4. Tony · February 3, 2013

    Is it true that Exakta and RE Auto Topcor are the same mount? I’m looking to adapt my RE Auto Topcor 35mm 2.8 to my EOS 7D. Can you advise me on how to do this and maybe point me to the correct adapter(s)? Thx

    • camerajunky · February 3, 2013

      According to Wikipedia, it is the same mount. But I have never held any Topcor lens in my hand, so I cannot really say. Also, I have picked up the first noname adapter I could find. So, it is rather hard for me to give an advise here. But I would like to hear about your experience if you have managed to figure this out. Bests, Gabor